SuctionTreat
Biological suction line cleaner
Biological suction line cleaner
www.biosurf.us © All rights reserved. Biosurf is registered trademark.
One of the most basic forms of maintenance to be performed in a dental office is suction line cleaning, but many offices neglect this task. When suction lines are not cleaned, debris begins to build up around joints and bends, and slowly clogs the line. This results in poor vacuum performance and bad odors in the system.
Biosurf® SuctionTreat contains safe naturally occuring microorganisms that will digest organic substances (like blood) and wastes that accumulate in suction lines. Degrading this material prevent the anaerobic bacteria from thriving in the system. Since the anaerobic bacteria create the malodors, Biosurf® SuctionTreat will safely reduce or eliminate odors in the system.
Biosurf® SuctionTreat contains safe naturally occuring microorganisms that will digest organic substances (like blood) and wastes that accumulate in suction lines. Degrading this material prevent the anaerobic bacteria from thriving in the system. Since the anaerobic bacteria create the malodors, Biosurf® SuctionTreat will safely reduce or eliminate odors in the system.
Features & Benefits
• Eliminates odor in all drains in operatory
• Treats laboratory and sanitary sink
• Extends pump life
• Degrades tissue material that may contain infectious bacteria and viruses
• Restores and maintains vacuum pressure
• Safe for septic tanks
• Biodegradable, not based on petrochemical ingredients
• Not acidic, non-hazardous, non-corrosive
• Formula not tested on animals
Instructions for use
Shake well before using.
Make a solution by pouring 3.4 fl oz (100 ml) Biosurf® SuctionTreat into 1 or 2 quarts (1-2 L) of water. Allow product to mix. each 3.4 fl oz (100 ml) Biosurf® SuctionTreat will treat 4-5 visits so apply equal amounts of the solution into each location. Apply part of the solution directly into the suction line and pour part of the solution into the spit sink.
For best results, apply at the end of each day, after cleaning, and DO NOT apply with antimicrobials, disinfectants, or hot water (>104°F).
WARNING !
Do not use the product with other chemicals
Close the cover well after use
Use solution within one week
• Eliminates odor in all drains in operatory
• Treats laboratory and sanitary sink
• Extends pump life
• Degrades tissue material that may contain infectious bacteria and viruses
• Restores and maintains vacuum pressure
• Safe for septic tanks
• Biodegradable, not based on petrochemical ingredients
• Not acidic, non-hazardous, non-corrosive
• Formula not tested on animals
Instructions for use
Shake well before using.
Make a solution by pouring 3.4 fl oz (100 ml) Biosurf® SuctionTreat into 1 or 2 quarts (1-2 L) of water. Allow product to mix. each 3.4 fl oz (100 ml) Biosurf® SuctionTreat will treat 4-5 visits so apply equal amounts of the solution into each location. Apply part of the solution directly into the suction line and pour part of the solution into the spit sink.
For best results, apply at the end of each day, after cleaning, and DO NOT apply with antimicrobials, disinfectants, or hot water (>104°F).
WARNING !
Do not use the product with other chemicals
Close the cover well after use
Use solution within one week
Biosurf United States > Biosurf worldwide
